|
印刷电子.第302-2部分:设备.喷墨.液滴体积的成像测量
Printed electronics - Part 302-2: Equipment - Inkjet - Imaging-based measurement of droplet volume
参考页数：17P.;A4
|
|
|
|
|
|
印刷电路板组件. 第1部分: 总规范. 使用表面安装和相关装配技术的焊接电气和电子组件的要求
Printed board assemblies - Part 1: Generic specification - Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies
参考页数：89P.;A4
|
|
|
|
|
|
印刷电子技术. 第202部分: 材料. 半导体油墨
Printed electronics - Part 203: Materials - Semiconductor ink
参考页数：22P.;A4
|
|
|
|
|
|
印刷电子技术. 第202部分: 材料. 导电油墨. 绝缘衬底上印刷导电层的机械弯曲试验
Printed electronics - Part 202-5: Materials - Conductive ink - Mechanical bending test of a printed conductive layer on an insulating substrate
参考页数：15P.;A4
|
|
|
|
|
|
印刷电子元件. 第403-1部分: 印刷性. 再现性要求. 印刷机评价的基本图案
Printed electronics - Part 403-1: Printability - Requirements for reproducibility - Basic patterns for evaluation of printing machine
参考页数：24P.;A4
|
|
|
|
|
|
电气材料、印刷板和其他互连结构和组件的试验方法. 第2-630部分: 互连结构材料的试验方法. 压力容器调节后的吸湿性
Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 2-630: Test methods for materials for interconnection structures - Moisture absorption after pressure vessel conditioning
参考页数：13P.;A4
|
|
|
|
|
|
印制板和其他互连结构用材料. 第2-47部分: 覆层和未覆层增强基材. 非卤化环氧化物无纺/机织E-玻璃增强层压板,导热率为2.0w/( m-K ),并具有规定的可燃性(垂直燃烧试验),无铅装配用铜覆层(IEC 61249-2-47-2018); 德文版本EN IEC 61249-2-47-2018
Materials for printed boards and other interconnecting structures - Part 2-47: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 2.0 W/(m·K) and defined flammability (vertical burning test), copper-clad for lead-free assembly (IEC 61249-2-47:2018); German version EN IEC 61249-2-47:2018
参考页数：27P.;A4
|
|
|
|
|
|
印制板和其他互连结构用材料. 第2-46部分: 复合和未复合增强基材. 非卤化环氧化物非织造/机织E -玻璃增强层压板,导热率(1.5w / ( m - K ))和规定的可燃性(垂直燃烧试验),无铅装配用覆铜板(IEC 61249-2-46-2018); 德文版本EN IEC 61249-2-46-2018
Materials for printed boards and other interconnecting structures - Part 2-46: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 1,5 W/(m·K) and defined flammability (vertical burning test), copper-clad for lead-free assembly (IEC 61249-2-46:2018); German version EN IEC 61249-2-46:2018
参考页数：27P.;A4
|
|
|
|
|
|
印制板和其他互连结构用材料. 第2-45部分:覆层和未覆层增强基材. 非卤化环氧化物无纺/机织E-玻璃增强层压板,导热率为1.0w/(m-K),并具有规定的可燃性(垂直燃烧试验),无铅装配用铜覆层(IEC 61249-2-45-2018); 德文版本EN IEC 61249-2-45-2018
Materials for printed boards and other interconnecting structures - Part 2-45: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 1,0 W/(m·K) and defined flammability (vertical burning test), copper-clad for lead-free assembly (IEC 61249-2-45:2018); German version EN IEC 61249-2-45:2018
参考页数：27P.;A4
|
|
|
|
|
|
电气材料、印刷板和其他互连结构和组件的试验方法. 材料和组件通用试验方法. 电路板的导电阳极丝(CAF)测试
Test methods for electrical materials, printed board and other interconnection structures and assemblies. General test method for materials and assemblies. Conductive anodic filaments (CAF) testing of circuit boards
参考页数：28P.;A4
|
|
|
|
|
