|
塑料.聚酰胺.粘度值的测定.修改件1:修正和更新引用JIS K 6920-2标准
Plastics - Polyamides - Determination of viscosity number - Amendment 1: Corrections, and update to reference to JIS K 6920-2
参考页数：8P.;A4
|
|
|
|
|
|
不饱和聚酯树脂增强塑料.用气相色谱分析法测定残留苯乙烯单体含量以及其它挥发性芳香烃含量
Reinforced plastics based on unsaturated-polyester resins - Determination of the residual styrene monomer content, as well as the content of other volatile aromatic hydrocarbons, by gas chromatography
参考页数：10P;A4
|
|
|
|
|
|
塑料.测定热塑塑料的熔体质量流动速率(MFR)和熔体容积流量速率(MVR).第1部分:标准方法
Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method
参考页数：24P;A4
|
|
|
|
|
|
塑料 试验用聚氯乙烯糊料的制备 齿轮传动混合方法
Plastics - Preparation of PVC pastes for test purposes - Planetary-mixer method
参考页数：8P.;A4
|
|
|
|
|
|
软泡沫聚合材料.拉伸强度和断裂伸长率的测定
Flexible cellular polymeric materials - Determination of tensile strength and elongation at break
参考页数：11P;A4
|
|
|
|
|
|
塑料.使用无模工艺的热塑材料试样的制备.第1部分:一般原则和试样的激光烧结
Plastics - Preparation of test specimens of thermoplastic materials using mouldless technologies - Part 1: General principles, and laser sintering of test specimens
参考页数：18P.;A4
|
|
|
|
|
|
塑料.环氧树脂.试验方法
Plastics - Epoxy resins - Test methods
参考页数：10P;A4
|
|
|
|
|
|
塑料.拉伸性能的测定.第5部分:单向纤维增强塑料复合物的试验条件
Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
参考页数：12P;A4
|
|
|
|
|
|
塑料 苯乙烯/丙烯腈(SAN)模塑和挤塑材料 第2部分:试样的制备和性能的测定
Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
参考页数：6P;A4
|
|
|
|
|
|
塑料 聚甲基丙烯酸甲酯(PMMA)模塑和挤塑材料 第1部分:命名体系和基本规范
Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 1: Designation system and basis for specifications
参考页数：5P;A4
|
|
|
|
|
