|
用于液压传动和一般用途的管接头.带ISO 261米制螺纹和O形圈密封的端口和柱头螺栓端头.第3部分:轻型(L系列)柱头螺栓端头的尺寸、设计、试验方法和要求
Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends (ISO 6149-3:2006)English version of DIN EN ISO 6149-3:2007-05
参考页数：19P.;A4
|
|
|
|
|
|
液压传动和通用连接件.软管接头.第2部分:带ISO 8434-1和8434-4 24°锥形连接件末端和O形圈的软管接头
Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24° cone connector ends with O-rings (ISO 12151-2:2003)
参考页数：18P.;A4
|
|
|
|
|
|
气压液动. 连接件. 孔口和螺柱端
Pneumatic fluid power -- Connections -- Ports and stud ends
参考页数：24P.;A4
|
|
|
|
|
|
液力和一般用途金属管接头.第5部分.螺纹液压动力接头的试验方法
Metallic tube connections for fluid power and general use -- Part 5: Test methods for threaded hydraulic fluid power connections
参考页数：18P;A4
|
|
|
|
|
|
气液动力系统连接器.第2部分:热塑管连接器
Connectors for pneumatic fluid power -- Part 2: Connectors for thermoplastic tubes
参考页数：18P;A4
|
|
|
|
|
|
气液动力系统连接器.第1部分:热塑管道用插入式连接器
Connectors for pneumatic fluid power -- Part 1: Push-in connectors for thermoplastic tubes
参考页数：46P;A4
|
|
|
|
|
|
一般用途的和流体动力用接头.带弹性密封件或金属与金属间密封件的ISO 261螺纹的端口和螺柱端头.第1部分:螺纹端口
Connections for general use and fluid power -- Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing -- Part 1: Threaded ports
参考页数：7P;A4
|
|
|
|
|
|
一般用途的和流体动力用接头.带ISO 261螺纹和O形环密封件的端口和螺柱端头.第1部分:在截断外壳体内装有O形密封件的端口
Connections for general use and fluid power -- Ports and stud ends with ISO 725 threads and O-ring sealing -- Part 1: Ports with O-ring seal in truncated housing
参考页数：6P;A4
|
|
|
|
|
|
流体动力用和通用连接件.带ISO261螺纹和 O 形环密封件的端口和螺柱端头.第3部分:小功能（L 系列）螺柱端头.尺寸设计、试验方法和要求
Connections for fluid power and general use -- Ports and stud ends with ISO 261 threads and O-ring sealing -- Part 3: Light-duty (L series) stud ends -- Dimensions, design, test methods and requirements
参考页数：14P;A4
|
|
|
|
|
|
流体动力用和通用连接件.带ISO261螺纹和 O 形环密封件的端口和螺柱端头.第2部分:大功能（S系列）螺柱端头.尺寸设计、试验方法和要求
Connections for fluid power and general use -- Ports and stud ends with ISO 261 threads and O-ring sealing -- Part 2: Heavy-duty (S series) stud ends -- Dimensions, design, test methods and requirements
参考页数：13P;A4
|
|
|
|
|
